ARN Trading Ltd t/a AHR International
Tel +44 (0)1727 738430
Fax +44 (0)1727 899394
AS9120 & ISO9001 Approved

Keene bearing part number system

The turntable identification code is composed of fifteen digits. Each digit position by itself or in combination with other digit positions defines individual characteristics.

Part number system

PrefixSuffixDefinition
..OUTER RING LIP SEPARABLE.
..OUTER RING.
AARNEEDLE ROLLER, SPHERICAL END.
AB.ANNULAR BALL BEARING, ANGULAR CONTACT, PAIR OF BEARINGS, DUPLEX MOUNTED, BACK-TO-BACK.
ABRNEEDLE ROLLER, BALL END.
ACR NEEDLE ROLLER, CONICAL END.
AF.ANNULAR BALL BEARING, ANGULAR CONTACT, PAIR OF BEARINGS DUPLEX MOUNTED FACE-TO- FACE .
AFRNEEDLE ROLLER, FLAT END.
AIC.ANNULAR BALL BEARING, SPLIT INNER RING, FOUR POINT BALL CONTACT.
AKRNEEDLE ROLLER, CRANKPIN END.
AOC.ANNULAR BALL BEARING, SPLIT OUTER RING, FOUR POINT BALL CONTACT.
ARRNEEDLE ROLLER, CROWNED OR RELIEVED DIAMETER.
ASR NEEDLE ROLLER, SHEARED ENDS, TUMBLED CORNERS.
AT.ANNULAR BALL BEARING, ANGULAR CONTACT, PAIR OF BEARINGS, DUPLEX MOUNTED, TANDEM.
ATRNEEDLE ROLLER, TRUNNION END.
BLA.ANNULAR BALL BEARING, ANGULAR CONTACT, METRIC SERIES.
BLC.ANNULAR BALL BEARING, RADIAL, NON-LOADING GROOVE CONSTRUCTION, METRIC SERIES.
BLCXANNULAR BALL BEARING, NON-LOADING GROOVE CONSTRUCTION, FOUR POINT BALL CONTACT, METRIC SERIES.
BLM.ANNULAR BALL BEARING, READIAL COUNTERBORED OUTER RING, METRIC SERIES.
BT.BALL THRUST BEARING, GROOVED RACES.
BTA.BALL THRUST BEARING, ANGULAR CONTACT RACES.
BTB.BANDED BALL THRUST BEARING, GROOVED RACES.
BTDD.BALL THRUST BEARING, DOUBLE DIRECTION TYPE, RIGID.
BTDS.BALL THRUST BEARING, DOUBLE DIRECTION, SELF-ALIGNING.
BTE.BALL THRUST BEARING, FLAT RACES.
BTS.BALL THRUST BEARING, SELF-ALIGNING.
CV.ANNULAR BALL BEARING, RADIAL NON-LOADING GROOVE CONSTRUCTION, VERY THIN SECTION.
CVXANNULAR BALL BEARING, NON-LOADING GROOVE CONSTRUCTION, FOUR POINT BALL CONTACT, VERY THIN SECTION.
EN.CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, CYLINDRICAL OUTER RING.
HA.ANNULAR BALL BEARING, ANGULAR CONTACT, INCH TYPE, HEAVY SERIES.
HC.ANNULAR BALL BEARING, RADIAL, NON-LOADING GROOVE CONSTRUCTION, INCH
HCXANNULAR BALL BEARING, NON-LOADING GROOVE CONSTRUCTION, FOUR POINT BALL CONTACT, INCH TYPE, HEAVY SERIES.
HM.ANNULAR BALL BEARING, MAXIMUM CAPACITY, RADIAL, COUNTERBORED OUTER RING, INCH TYPE, HEAVY SERIES. ^
JR.JOURNAL ROLLER BEARING, HEAVY SERIES.
JRS.JOURNAL ROLLER BEARING, SUPER HEAVY SERIES.
K.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
KA THRU.
KA THRU.
KA THRU.
KGAANNULAR BALL BEARINGS, ANGULAR CONTACT, COUNTERBORED OUTER RING, INCH TYPE, REALI-SLIRN SERIES.
KGCANNULAR BALL BEARING, RADIAL; NON-LOADING GROOVE CONSTRUCTION, INCH TYPE, REALI-SLIM SERIES.
KGXANNULAR BALL BEARING, FOUR POINT CONTACT, INCH TYPE, REALI-SLIM SERIES.
KH.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
KJ.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
KJ.NEEDLE BEARING, THIN SHELL, RADIAL, WITH RETAINER, OPEN ENDS.
KL.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
KN.NEEDLE BEARING, THIN SHELL RADIAL, GREASE RETAINED, OPEN ENDS.
KP.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
KR.CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, INCH TYPE, REALI-SLIM SERIES.
KT.TAPERED ROLLER BEARING, SINGLE ROW, NORMAL ANGLE, REALI-SLIM SERIES.
LC.ANNULAR BALL BEARING, RADIA.1 , NON-LOADING GROOVE CONSTRUCTION, INCH TYPE, LIGHT SERIES.
LC X.ANNULAR BALL BEARING, NON-LOADING GROOVE CONSTRUCTION, FOUR POINT BALL CONTACT, INCH TYPE, LIGHT SERIES.
M.NEEDLE BEARING, THIN SHELL RADIAL, GREASE RETAINED, ONE END CLOSED.
NT.NEEDLE BEARING, THRUST, ROLLERS AND STEEL RETAINER ONLY.
RF.CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, ONE LIP OUTER RING.
RFW.WIDE TYPE CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, ONE LIP OUTER RING.
RM.CYLINDRICAL ROLLER BEARING, MILL TYPE.
RND.CYLINDRICAL ROLLER BEARING, DOUBLE-ROW, PRECISION FOR SPINDLES.
RNW.WIDE TYPE CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, CYLINDRICAL
RP.CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, TWO LIP OUTER RING, ONE
RPW.WIDE TYPE CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, TWO LIP OUTER RING, ONE OUTER RING LIP SEPARABLE.
RS.SPHERICAL ROLLER BEARING.
RT.ROLLER THRUST BEARING, FLAT RACES.
RTB.BANDED ROLLER THRUST BEARING.
RTC.CONICAL ROLLER THRUST BEARING.
RTDD.ROLLER THRUST BEARING, DOUBLE ACTING, RIGID.
RTDS.ROLLER THRUST BEARING, DOUBLE ACTING, SELF-ALIGNING.
RTS.ROLLER THRUST BEARING, SELF-ALIGNING.
RU.CYLINDRICAL ROLLER BEARING, TWO LIP OUTER RING, CYLINDRICAL INNER RING.
RUW.WIDE TYPE CYLINDRICAL ROLLER BEARING, TWO LIP OUTER RING, CYLINDRICAL INNER RING.
RX.CYLINDRICAL ROLLER BEARING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, EXTRA LIGHT.
S.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
T.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
TDI.TAPERED ROLLER BEARING, DOUBLE-ROW, DOUBLE CONE.
TFR.TAPERED ROLLER BEARING, FOUR ROW, TWO DOUBLE CANES, THREE CUPS.
TNA.TAPERED ROLLER BEARING, DOUBLE-ROW, NON-ADJUSTABLE.
TOO.TAPERED ROLLER BEARING, DOUBLE-ROW, DOUBLE CUP.
TS.TAPERED ROLLER BEARING, SINGLE-ROW, NORMAL ANGLE.
TSF.TAPERED ROLLER BEARING, SINGLE-ROW, FLANGED CUP.
TSS.TAPERED' ROLLER BEARING, SINGLE-ROW, STEEP ANGLE.
V.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.
W.ANNULAR BALL BEARINGS, FOUR POINT CONTACT BALL, TURNTABLE TYPE.

Contact us now and let us show you exactly what we can do for you.

ARN Trading Ltd t/a AHR International 2010 All rights reserved