The Split Roller Bearing (SRB) range offers an alternative to the well known Cooper Bearing range of split roller bearings. Designed with maximising life and reducing maintenance times the split roller bearing is at it's best where standard SN/SB blocks would simply cost too much in down time to use.

Key advantages of the Split Roller Bearing range include:

• All blocks are made from P180 Iron (250 grade) (alternative brands only use P160)
• Support blocks are 20% heavier than alternative brands bringing further support and resistance to deformation
• All supports and housing incorporate pry slots and doweled machined joints for easy separation
• All cages are of solid brass construction by default
• Cage clips which don't fly off during maintenance as they are retained to one half of the cage
• Simple fast inspection process with fast removal of split caps and housing halves
• Replacement bearings are interchangeable with your exsisitng housings
• Units will accomodate initial misalignment
• Profilled rolling elements to reduce edge stresses and increase life
• All components are split to the shaft

Split roller bearings can be found in Air movement, cement, power generation, quarrying, conveyor systems, sugar processing, metal processing, timber processing, mining and general manufacturing.

For more information on the range of Split Roller Bearings, use the links below:

Support types | Bearing types